Product Finder

The Prolificx Range of telematics vehicle tracking devices offers specific feature sets for use in different commercial situations. To define which product best suits your vehicle or fleet tracking requirements please select the product features from the below list and click enter.

The best device/s identified will be shown.



  • Windows CE
  • Wifi
  • GSM/GPRS
  • 3G/HSDPA/UMTS/EDGE
  • BLUETOOTH
  • Vehicle Bus J1708
  • CAN Bus
  • Vehicle Bus J1939 Capable
  • GPS
  • Audio
  • 3 AXIS Accelerometer
  • PXA270 High Performance Processor
  • Flash Memory 32 MB
  • Power Supply 12v
  • Power Supply 24v
  • USB Host
  • RS232 x 1
  • SDRAM 64mb

Featured Product

PLCTag

The PLCTag is used in fleet tracking to provide identification information to a reader device to ensure the connected equipment can be identified, tracked and verified. The PLCTag also ensures that the correct trailer (or similar) is attached to the right tractor. Its small size (approx I.5 inches square) means the tracking device can usually be mounted inside a trailer's J560 housing.
More info on PLCTag

PLCTag - Trailer Tracking

PLCTag - Trailer Tracking

Prolificx’s PLCTag is typically used to track a trailer or dolly and is used to provide identification information to a reader device. This allows connected equipment to be automatically identified and tracked, and verifies that the correct equipment is attached.

Its small size means it can usually be mounted inside a trailer's SAEJ560 housing

In addition to a factory programmed unique ID, the PLCTag has a 12 character user programmable ID so user definable naming conventions can be used. The user programmable ID can be programmed in-system with a programming tool.

The PLCTag is based around a communication standard called PLC4Trucks which uses the power wires of a vehicle to transmit the signals.
The PLCTag when used in conjunction with a reader device such as our Vector 300GWP, is able to:

  • Detect trailer hook and drop hook events
  • Track trailer equipment in realtime
  • Report distance
  • Provide gate arrival and departure warning

The PLCTag also has two digital inputs which can be used to monitor and track the status of door switches, lamps, or other digital sensing equipment.

 

 

 

 

 

 

Operating Voltage

10-16VDC with internal fuse (Load dump/ transient protected to SAE J1455 standard) Internal over voltage protection

Identification

Factory programmed fixed unique ID - 12 Character in system user programmable ID

Size

38mm * 44mm * 10mm (1.07" * 1.7" * .4")

Communications

PLC4Trucks

Operational Functionality

Randomized broadcast rate between 2-4 seconds
Supports multiple concurrent tags
Can be queried on demand by reader

Operating Temperature

-40°C - +85°C

Connections

Typically a two wire connection of power/comms and ground
Three wire connection option with separate power and communications
2 * Digital inputs (optional)

If you would like one of our regional representatives to call you, please complete this request form .








Your Location:

Comments:
I require more info on solutions for: